







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Home Additions & ADU Across Stanton
If you’re planning an addition or an ADU in Stanton, you already know the city is tight. Roughly two square miles, hemmed in on every side, and almost no open land left to build on. That changes the whole job. Most of the projects we take on here are working around existing 1950s and 60s stucco homes on slab, tucked onto small lots with narrow side yards. We know Stanton’s blocks, its setbacks, and its permitting rhythm, and we build scope around the salt air that quietly eats cheap hardware. Call (855) 506-4558 to schedule a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Stanton Homeowners Call Construction Costa Mesa for Home Additions & ADU

Stanton is small enough that word travels. Neighbors talk over back fences, and a contractor’s work on one block gets seen on the next. Our reputation here comes from doing the harder, less visible part right: opening walls before we write scope, verifying the load path and slab, and specifying hardware that survives the air this city sits in.
Stanton customers tell us the same thing again and again. They want one contract that covers design, permitting, and construction, not three contractors pointing at each other when a change order lands. Because we handle the full scope under one agreement, there’s a single point of responsibility from drawings to final inspection.
Response into Stanton is genuinely fast. We’re based in Costa Mesa and the drive up to the 90680 is short, so a site visit or a walkthrough with your plans doesn’t eat a week of your schedule. Our technicians have up to 11 years of experience, and that matters most in older homes where the surprises live inside the walls.
The local knowledge that builds trust is quieter than a sales pitch. Knowing that a garage conversion behind a post-war tract home often turns up a galvanized supply line or a panel that won’t carry the new load is the difference between a scope that holds and one that blows up mid-build. We plan for those finds before they find us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Home Additions & ADU Services in Stanton
Every sub-service we offer here deals with the same Stanton reality: small lots, older shells, and marine-influenced air. Here’s how each one plays out.
ADU Design & Permitting
Design and permitting on a Stanton ADU starts with the lot, not the floor plan. Side-yard setbacks and the existing footprint usually set the size before your wish list does. We walk the site, confirm what Orange County will actually approve, and build the drawings around those limits. You can see the full range of what we handle on our home additions & ADU hub.

Garage Conversion ADU
A garage conversion is often the cheapest path to a rentable or family-ready unit, and it’s one of the most common jobs we do in Stanton. The catch is the original slab and the wiring behind those old walls. We verify the slab condition and the electrical service before rough-in, so the conversion clears inspection without a surprise change order.

New Detached ADU
A detached ADU on a Stanton lot is a tight-lot puzzle. Narrow side yards limit staging, and the foundation has to work around mature trees and neighboring property lines. We handle both site-built additions and prefab options through partners like Abodu and Dvele, which can ease the build on a cramped lot. Either path still answers to local zoning, so we start there.

Second Story Additions
A second story is how a lot with no room to grow sideways grows up. On a 1950s slab home, that means verifying the load-bearing path and the foundation before a single stud goes in. We open the walls, check what the decades left behind, and write stainless or hot-dip hardware and sealed joints straight into the scope.
Trusted Brands We Service in Stanton
Material choices are specified, not substituted. For prefab and modular ADU paths, we work with manufacturers including Abodu and Dvele, plus custom site-built options, so the ADU you get matches what was drawn. Roofing systems come from names like GAF, CertainTeed, and Owens Corning, and window and door programs from PGT and Therma-Tru when a project calls for new openings. We specify these brands by name so the warranty story matches the assembly. We don’t stock parts. We match materials to the job and to Stanton’s conditions, and we line them up so the schedule holds.
See the difference
Before
After
Before
After
Before
AfterCommon Home Additions & ADU Problems We See in Stanton Homes
Open enough walls in Stanton and the same issues surface. These are the ones that bite hardest.
- Cheap fasteners that rust early. Standard zinc-plated fasteners and railings pitting and bleeding rust within a few years on additions exposed to onshore air. The fix is stainless or hot-dip hardware, spec’d before permits are pulled, not after the rust shows.
- Original aluminum wiring or an undersized panel. A new ADU or second-story load can overwhelm a service that was never sized for it. It fails inspection sign-off and turns into a change order mid-build, which is exactly the kind of surprise we plan around.
- Dry rot and stucco cracking. Decades of marine-influenced air and intense summer sun leave fascia soft and stucco cracked. We check these before rough-in so the repair is in the scope, not bolted on later.
- Slab and plumbing surprises. Galvanized or early copper lines under a 1950s slab often need relocation before a conversion or addition can proceed. Slab-on-grade construction makes re-piping trickier than a crawlspace job, so we verify before the draw schedule is set.
Pricing for Home Additions & ADU in Stanton, CA

Here’s an honest picture of what work in Stanton typically runs. These are estimated ranges, and the written, line-item estimate sets your final price. Nothing moves without your sign-off.
| Project | Typical Estimated Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What moves the number is the condition we find once walls are open: slab integrity, plumbing relocation, and whether the electrical service can carry the new load. The coastal-spec version, with stainless hardware and sealed joints, costs more up front than the thin inland spec, and less over a decade because it doesn’t come back. Call (855) 506-4558 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We Also Serve Cities Near Stanton
Stanton sits close to several neighboring cities, and we work in all of them. That includes Garden Grove to the east, Cypress to the north, Westminster to the west, and Midway City just over the line. The same salt air and tight lots show up across these cities, so the approach carries over.
Serving Stanton, CA – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Home Additions & ADU in Stanton

Onshore air carries salt, and it corrodes plain zinc-plated hardware faster than dry inland conditions do. The salt air reaches Stanton even though it sits a few miles from the beach, so we specify stainless or hot-dip hardware and marine-grade finishes instead of the thin inland spec. That’s the difference between hardware that lasts and hardware you replace in a few years. Call (855) 506-4558 for an exact quote on your project.
Usually yes, but the setback rules decide the footprint before anything else does. Stanton’s lots are small and tightly hemmed in, so side-yard clearances and the existing structure limit where a detached unit can sit. We confirm what your lot allows during design and permit review, so the plan fits before you commit. Call (855) 506-4558 to walk your lot with us.
Yes, a garage conversion ADU requires a permit, and inspection sign-off is part of the process. Orange County permitting for accessory units is something we navigate for you, from drawings through final inspection. We handle the paperwork and the inspection sequence so you’re not chasing approvals yourself. Call (855) 506-4558 for an estimate.
Look for slab and load-path verification, the hardware spec, and how change orders are handled before you sign. An older slab home can hide dry rot, corroded fasteners, or a plumbing line that has to move, and the contract should name how those are priced and handled. Get stainless or hot-dip hardware written in, not assumed. Call (855) 506-4558 and we’ll walk your contract questions through.
The coastal-spec version costs more up front, and less over the life of the build. Stainless fasteners, marine-grade finishes, and sealed joints raise the initial number, but the cheap inland spec fails early in Stanton’s air and forces replacement within a decade. A typical ADU in Stanton runs $90,000 – $220,000 depending on the spec and site. Call (855) 506-4558 for a free line-item estimate.
If you’re ready to plan an addition or ADU in Stanton, call Construction Costa Mesa at (855) 506-4558 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written, line-item quote with permits, inspections, and a workmanship warranty spelled out, so you know exactly what you’re paying for before work begins.
Written by the team at Construction Costa Mesa.












